14 Ton Vibratory Road Roller Xs143j China Single Drum Roller

• Customization: Available
• After-sales Service: 1 Years
• Warranty: 1 Years
• Model NO.: XS143J
• Type: Road Roller
• Working Method: Vibration
• Axle: Single Drum Roller
• Grinding Wheel Type: Steel
• Compaction Depth: 40cm
• Engine Type: Diesel Engine
• Travel Speed: 11km/H
• Centrifugal Force: 274/137kN
• Certification: CE
• Condition: New
• Operating Wieght: 14000kg
• Drive Wheel Distribution Quality Vibrato: 7300kg
• Vibratory Drum Distribution Quality: 6700kg
• Static Line Load: 315n/Cm
• Vibration Frequency: 28Hz
• Theoretical Gradeability: 30%
• Transport Package: Container
• Specification: 6010x2300x3200mm
• Trademark: Xuzhou Brand
• Origin: Xuzhou, Jiangsu
• HS Code: 8429409000
• Production Capacity: 1

Product Description

14 Ton Vibratory Road Roller XS143J  China Single Drum Roller

XS143J tyre roller is a large-tonnage tyre roller produced according to market requirements, which will take pneumatic tyres as working device for compacting paved materials. The tyre roller is mainly applicable for compacting operation of asphalt pavement,foundation layer, secondary foundation layer, dam and filling engineering. It is an ideal set of compacting equipment forb building high grade highway, airport, port, dam and industrial construction site.

* Closed hydraulic drive system is adopted to realize stepless speed change.

* Brake system uses the neutral position braking, emergency braking and parking brake, short braking distance and high
brakingtorque, ensuring the safety of the product.
* The front vision of machine is less than 1x0.75 m, rear view without any shade, which provides drivers with a good sight range.
* The vibration system can realize the simultaneous vibration and independent vibration of the rear and front drum, and meets the different working conditions.
* High frequency vibration and excitation force design, high working efficiency, good compaction effect.
* Vibration drum width is larger than frame width, convenient to observe compaction condition of drum edge in the construction.
* Large ground clearance and curb clearance, strong trafficabilit, good edge com- paction performance.
* This machine has also the air intake preheating function, can realize low temperature cold start.
* Changchai water-cooled turbocharged engine, in compliance with China Stage III emission requirements, allowing machine working normally in the environment at an altitude of 2000 meters and temperature above -20 ºC

Product Parameters

 

Item		Unit	XS143J
Maximum operating mass		kg	16000
Ground pressure		kPa	150~ 300
Travel speed	Gear I	km/h	4
	Gear II	km/h	8.3
	Gear II	km/h	17.5
Theoretical gradeability		%	20
Minimum turning radius		mm	7330
Minimum ground clearance		mm	260
Compaction width		mm	2250
Overlapped volume of roller		mm	45
Tires	Specification		11.00-20
	Quantity		Front 4 rear 5
Engine	Type		SC4H115.4G2B
	Rated power	kw	86
	Fuel consumption	g/kw.h	≤205
Total length		mm	4800
Total width		mm	2356
Total height		mm	3330
Diesel tank volume		L	150
Water tank volume		L	650

Certifications

 

Packaging & Shipping

After Sales Service

 

Company Profile

FAQ